 |
|
 |
 |
 |
|
 |
|
Components of the pneumatic ice delivery system are listed individually below in order to permit both a preliminary layout and budgetary pricing of a 50 HP blower system. The final jobsite layout will determine the actual blower size, which, if different, can significantly change the blower price. TURBO uses a computerized program for blower sizing. TURBO will supply complete sizing and pricing of your blower system. Please answer the questions in the "Blower Selection Guide" below.
Click on
Plan view & Elevation of Blower
A. INCLINE SCREW CONVEYOR
To deliver ice from the rake floor screw to the batch scale: Includes 9 inch(22.86cm) diameter galvanized steel incline screw conveyor with drive motor for 100 RPM operation, 14 gauge trough with shroud cover, standard pitch screw and discharge spout. Incline trough support supplied and installed by others. 24 foot(7.3 M) long incline screw conveyor
B.BATCH WEIGHING SCALE
A 150 pound (68kg) capacity batch scale capable of handling/weighing 25 U.S. tons(22.6 metric tons) per hour. Includes complete kit with electronic scale with cardinal unit, load cell on the scale, 12 inch(30.5 cm) discharge screw conveyor, 24 inch(60.1 cm) platform to accept rotary air lock valve, and a 600 pound(272 kg) discharge hopper. 150 Pound Batch Scale Electronic Count-Down Controller
C.PNEUMATIC ICE BLOWER
To deliver ice from the rake floor screw to the batch scale: Includes 9 inch(22.86cm) diameter galvanized steel incline screw conveyor with drive motor for 100 RPM operation, 14 gauge trough with shroud cover, standard pitch screw and discharge spout. Incline trough support supplied and installed by others. 24 foot(7.3 M) long incline screw conveyor
DELIVERY COMPONENTS
D. Aluminum Tubing - 5 inch(12.7 cm) diameter in 20 foot (6.1 M) lengths
Tube Elbows
Tube Couplings
Tube Couplings
E. Two Position Diverter Valve - Manual
Two Position Diverter Valve - Automatic
Three Position Diverter Valve - Automatic
Three Position Diverter Valve - Automatic
F. Flexible Hose - 5 inch(12.7 cm) diameter - not to exceed 20 foot (6.1 M) lengths
Hose-To-Tube Connector
Hose Nozzle
Hose Nozzle
G. Cyclone - 4 foot (1.2 M) diameter.
Note: Cyclone 12 used to reduce ice discharge velocity and drop ice by gravity at selected point.
BLOWER SELECTION GUIDE
For sizing and pricing, please answer the following questions and send to TURBO, including a sketch, if possible.
1.What is the total horizontal distance that the ice is to be blown to the discharge point?
2.What is the vertical height of the highest point along the tubing ice-run?
3. what is the total quantity of ninety degree(90 °) tube elbows? Tube elbows have a 90 foot(2.75 M) radius.
4. what is the desired ice delivery rate in pounds (or kilograms) per hour ?
1.What is the total horizontal distance that the ice is to be blown to the discharge point?
2.What is the vertical height of the highest point along the tubing ice-run?
3. what is the total quantity of ninety degree(90 °) tube elbows? Tube elbows have a 90 foot(2.75 M) radius.
4. what is the desired ice delivery rate in pounds (or kilograms) per hour ?
  |