Home > Products > Thermal Energy Storage Specs

Thermal Energy Storage Series

Description | Technical Data | Specifications

Equipment:

The ice making equipment shall be a completely factory assembled unit of the harvesting type provided by TURBO REFRIGERATING COMPANY. The equipment shall have the following features:

Evaporater sections

The evaporater section shall utilize vertical evaporater plates made of 304 stainless steel.

Water distribution

The equipment shall have a stainless water distribution pan and be provided with all water distribution piping.

Frames

The frames (HP) shall be fully welded and hot dip galvanized after fabrication.
The frames(IGC) shall be fully welded and coated with a rust preventative primer and water proof finish.

Cabinets

The cabinets shall be insulated with 2" of foam urethane and suitable for outdoor application. The outer panels shall be protected with an approved exterior finish.

Compressor

The compressor shall be of the open(semi-hermetic) reciprocating type complete with motor and starter, or screw compressor with motor or starter.

Condensers

The condenser shall be of the evaporative type,(water cooled),(air cooled).

Refrigerant piping

The refrigerant piping shall utilize direct expansion valves, hot gas harvesting valves and a suction line accumulator with integral liquid suction interchanger, receiver designed to hold entire refrigerant charge. All vessels shall be constructed in accordance with the ASME Pressure Vessel Code.

Controls

Controls shall be electric or electronic and include all ice harvesting controls, water level controls, and refrigeration controls.

TESTING:

All system components are operationally checked before shipping.
Full factory run tests are available upon request.